Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch of the Triumph Daytona 675R

Model: Triumph Daytona 675
Part: Clutch

Video tutorial

The following instructions will show us how to disassemble and replace the clutch of the Triumph Daytona 675R motorcycle. First, put the motorcycle on a stand and start by unscrewing the oil drain bolt, letting the oil drain into a container for about ten minutes; then unscrew the screws of the side cover, accessing the clutch, as shown in the video.

At this point, unscrew the clutch pack screws, removing all the discs one by one; install the new original clutch kit, finally fixing the side cover, following the video tutorial until the end for reassembly!


Posted on 27 July 2025 by ScegliAuto


Related tutorials

How to replace the exhaust on a Triumph Daytona 675R?
How to replace the exhaust on a Triumph Daytona 675R?
Daytona 675 To replace the exhaust on a Triumph Daytona 675R, expand the connecting clamp located between the exhaust and the exhaust manifold. Once this clamp i…
How to Replace the Headlight Bulb on a Triumph Daytona 675R?
How to Replace the Headlight Bulb on a Triumph Daytona 675R?
Daytona 675 To replace the headlight bulb on a Triumph Daytona 675R, you need to loosen the screws that secure the protective panels covering the bulbs: these ar…
How to Change the Engine Oil in a Triumph Daytona 675R
How to Change the Engine Oil in a Triumph Daytona 675R
Daytona 675 In this tutorial, you will see how to change the engine oil in a Triumph Daytona 675R, an extremely simple and quick operation. First, ensure the eng…

How to Remove the Rear Wheel of the Triumph Tiger 800

To remove the rear wheel of the Triumph Tiger 800, loosen the nuts located in the centre of the wheel that secure the central axle to the end of the swingarm. Once these two nuts are removed, unscrew the bolts that secure the rear brake caliper, detaching it from the disc; you will also need to move the chain from the corresponding sprocket. When all these components have been removed, it will be possible to completely detach the wheel, allowing you to insert a new replacement part, reassembling all previously removed components.

Watch the video!


by ScegliAuto

More videos