Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Tiger 800 XC

Model: Triumph Tiger 800 Xc
Part: Air filter

Video tutorial

Replace the air filter on a Tiger 800 XC. Follow this guide video for the air filter replacement procedure. Position the motorcycle on the centre stand; lift the tank, and remove the fastening screws of the container cap where the air filter and throttle valves are located (as shown in the video).

After removing the container screws, uncover the cap and take out the air filter. Install a new one if damaged or reposition the same after cleaning it. Finally, close the air filter container and reassemble the plastic.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Removing the Air Filter on a Triumph Tiger 800 Xc
Removing the Air Filter on a Triumph Tiger 800 Xc
Tiger 800 Xc Remove the original engine air filter on a Triumph Tiger 800 Xc. Follow this guide to proceed with the replacement. Position the motorcycle on a cent…
Replace the Engine Oil and Oil Filter on the Triumph Tiger 800
Replace the Engine Oil and Oil Filter on the Triumph Tiger 800
Tiger 800 Xc Changing the engine oil and oil filter is necessary to ensure the engine operates correctly. Start by placing your motorcycle on the centre stand and…
How to Replace the Engine Oil and Oil Filter on a Triumph Tiger 800
Tiger 800 Xc To ensure the longevity of your engine, it is necessary to regularly perform routine maintenance; here’s how to replace the engine oil and oil filter…

How to Set the Time on a Kymco DTX360?

To set the time on a Kymco DTX360, follow these steps. First, turn on the scooter and ensure it is in time display mode on the dashboard. Once you find this mode, press and hold the button for setting the time, located on the scooter's handlebars. After a few seconds, the display will start to flash, indicating that you can now adjust the time. Use the adjustment buttons to increase or decrease the hour until you reach the desired time. When you have set the correct time, press the time setting button again to confirm your selection. The display will stop flashing and the time will be set correctly. Be sure to consult the owner's manual for specific instructions for your Kymco DTX360 model, as the procedure may vary slightly.

Watch the video!


by ScegliAuto

More videos