Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before starting, position your Triumph Tiger 800 upright. Begin by removing the rear passenger seat using the motorcycle key. Next, unclip and remove the rider's seat by simply pulling it out of its housing. This will give you access to the flat battery. Proceed to unclip and remove the battery cover. Then, unscrew and remove the screws securing the two terminals to the battery, and disconnect the terminals. At this point, you can extract and remove the battery from its housing, completing the disassembly. To install the new battery, follow these steps in reverse, and you will have completed the replacement.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Battery replacement for the Triumph Tiger 800 XC
Battery replacement for the Triumph Tiger 800 XC
Tiger 800 Xc Today's procedure will show us how to disassemble and replace the battery of the Triumph Tiger 800 XC motorcycle, in simple steps. First, we put the …
How to Replace the Battery on a Triumph Tiger 800 XC?
How to Replace the Battery on a Triumph Tiger 800 XC?
Tiger 800 Xc To replace the battery on a Triumph Tiger 800 XC, insert the key into the lock located just above the number plate. This will unlock the rear of the …
Replacing the Coolant on the Triumph Tiger 800
Replacing the Coolant on the Triumph Tiger 800
Tiger 800 Xc This guide shows you how to bleed the cooling circuit and replace the antifreeze on a Triumph Tiger 800. First, disconnect the coolant hose; then loo…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos