Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Lift the seat by inserting the appropriate key into the slot on the left fairing, then release the catch and remove the screw that holds the unit above the battery in place. Once done, you will reach the two terminals: unscrew them and then disconnect them, remembering to always start with the negative terminal and only then move to the positive. After this, you can already pull the battery out of its housing and proceed to install the new one, simply working in reverse order. As you can see, this is a straightforward task that is within everyone's reach.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement on Triumph Street Scrambler 2020
Engine Oil and Oil Filter Replacement on Triumph Street Scrambler 2020
Street Scrambler In this video, learn how to replace the engine oil and oil filter while performing the regular maintenance service on a 2020 Triumph Street Scrambler…
Replacement of the brake pads of the Triumph Street Scrambler
Replacement of the brake pads of the Triumph Street Scrambler
Street Scrambler In this guide we will see step-by-step instructions on how to disassemble and replace the front and rear brake pads of the Triumph Street Scrambler m…
How do you replace the front brake pads of the Triumph Street Scrambler?
How do you replace the front brake pads of the Triumph Street Scrambler?
Street Scrambler In order to replace the front brake pads of the Triumph Street Scrambler, you need to loosen the screws that secure the brake caliper to the correspo…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos