Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber on the Triumph Tiger 800 XC?

Model: Triumph Tiger 800 Xc
Part: Shocks

Video tutorial

To replace the rear shock absorber on the Triumph Tiger 800 XC, loosen the bolts securing it to its housing: the bolts are located at the swingarm and near the rear mudguard. Once both bolts are loosened, you can completely remove the old shock absorber from its housing to insert the new one; this should be secured with the appropriate bolts at both the lower and upper parts to ensure everything functions correctly.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Triumph Tiger 800
How to Replace the Clutch on a Triumph Tiger 800
Tiger 800 Xc You can replace the clutch on a Triumph Tiger 800 by removing all the screws that secure the corresponding cover, located on the right side of the bi…
How to Replace the Starter Motor on a Triumph Tiger 800
How to Replace the Starter Motor on a Triumph Tiger 800
Tiger 800 Xc To replace the starter motor on a Triumph Tiger 800, loosen the screws securing it to its housing after disconnecting the battery. The screws are acc…
How to Replace the Battery on a Triumph Tiger 800 XC?
How to Replace the Battery on a Triumph Tiger 800 XC?
Tiger 800 Xc To replace the battery on a Triumph Tiger 800 XC, insert the key into the lock located just above the number plate. This will unlock the rear of the …

How to Set the Time on a Kymco DTX360?

To set the time on a Kymco DTX360, follow these steps. First, turn on the scooter and ensure it is in time display mode on the dashboard. Once you find this mode, press and hold the button for setting the time, located on the scooter's handlebars. After a few seconds, the display will start to flash, indicating that you can now adjust the time. Use the adjustment buttons to increase or decrease the hour until you reach the desired time. When you have set the correct time, press the time setting button again to confirm your selection. The display will stop flashing and the time will be set correctly. Be sure to consult the owner's manual for specific instructions for your Kymco DTX360 model, as the procedure may vary slightly.

Watch the video!


by ScegliAuto

More videos