Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the clutch on Sherco brand motorcycles, the same operation will need to be performed for almost all models: first, you will need to loosen the screws that secure the cover located on the right side of the motorcycle, in the central lower part. By removing the cover from this position, it will be possible to identify the underlying discs that will need to be removed from their seat: by inserting the new discs, it will be possible to secure them with the appropriate screws so that they can then be covered with the cover, verifying their correct operation.

Posted on 15 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How the Clutch Works
How the Clutch Works
(Various brands) Various This video explains simply how the clutch mechanism works. There are three components: the flywheel, the clutch cover, and the clutch itself, which i…
How to tell if your car's clutch is still reliable
How to tell if your car's clutch is still reliable
(Various brands) Various How to assess the wear of your car's clutch? If the clutch "grabs" when starting, it means the clutch is worn and no longer engages properly with the…
How to Replace the Clutch Lever on a KTM 125 Motorcycle
How to Replace the Clutch Lever on a KTM 125 Motorcycle
(Various brands) Various In this short video, you will see how to replace the left lever (which represents the clutch) on the KTM 125 motorcycle. First, use pliers to unscrew…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos