Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Key Battery on Triumph Motorbike

Model: (Various brands) Various
Part: Key

Video tutorial

Replacing the key battery on a Triumph motorbike is really simple, a task that anyone can perform without needing to go to a workshop. To do this, simply unscrew the small screw that secures the cover on the key fob, using a 1.5 mm Allen key. Voila! Once you have removed the cover, you will find the sought-after battery (a CR2032) right in front of you. Now, with a small flathead screwdriver, pry in the slot next to the battery, lever it out and remove it. Insert the new battery and reassemble the fob.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

Replacing Handlebar Grips on Aprilia Motorbike
Replacing Handlebar Grips on Aprilia Motorbike
(Various brands) Various Today, we will discuss a replacement that may seem trivial but is very important: replacing the handlebar grips on an Aprilia motorbike. This replace…
Replacing the Remote Battery on a Harley Davidson
Replacing the Remote Battery on a Harley Davidson
(Various brands) Various Today, you will perform a very simple task: removing and replacing the battery in the key used for Harley Davidson motorcycles. First, remove the man…
How to Reset the Noodoe Display on Kymco Motorbikes?
How to Reset the Noodoe Display on Kymco Motorbikes?
(Various brands) Various To reset the Noodoe display on Kymco motorbikes, turn the ignition key to position two and simultaneously press the button located on the right side …

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos