Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery of a Chinese Scooter

Model: (Various brands) Various
Part: Battery

Video tutorial

In this video, see how to replace the battery of a Chinese scooter (this method should work for most scooters): you only need a crosshead screwdriver. In most scooters of this type, the battery is located under the central footwell, beneath a cover secured with four crosshead screws, where the battery is held in place by two screws at the terminals.

Remove the screws and extract the old battery (dispose of it at an authorised recycling centre). It's a good idea to measure the battery compartment, as it may accommodate a larger battery.

Then, place the new battery in position, securing the terminals: check if the scooter starts, then refit the cover onto the base, and the operation is complete.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

(Various brands) Various Today, you will learn the steps to change the engine oil while performing the regular maintenance service on a GY6 49cc-150cc scooter (Chinese scoote…
(Various brands) Various This video demonstrates how to connect a battery maintainer to a scooter battery. This device is useful during long periods of inactivity, such as th…
(Various brands) Various In this tutorial, you will see how to replace the battery in the remote control of an Aprilia scooter, a very simple and quick operation. You will ne…

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the battery located in the Sym Jet X? Read answer
    • Vari - Where is the battery located in the Piaggio Beverly? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer
    • Vari - Where is the battery of my Piaggio Medley 150? Read answer

How to Replace the Variator of the Honda PCX 125

This guide outlines the steps to remove and replace the variator of the Honda PCX 125 scooter. First, place the scooter on its centre stand and begin by removing the clutch cover by unscrewing the fastening screws. Next, unscrew the central nut of the fan and the one on the clutch bell, then remove the belt and the variator, as shown in the video. Now, install the new variator with the new rollers, reassemble the belt and the entire transmission, and finally refit the cover!

Watch the video!


by ScegliAuto

More videos