Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. IVECO
    3. :
  3. Stralis
    4. : What is the fuse scheme and where is the fuse box of an Iveco Stralis located?

IVECO Stralis - Video tutorial

Model: IVECO Stralis MK 1 - Years 2002-2008
Part: Fuse box
Operation: What is the fuse scheme and where is the fuse box of an Iveco Stralis located?

The video attached to this article shows the positioning diagram of all the fuses of our Iveco Stralis. The fuses have the role of preventing damage to the electrical components of the vehicle, breaking the circuit in the event of a current overload or a sudden short-circuit. All fuses are located inside the fuse box. In order to reach it, we will have to start by sitting on the front passenger seat, and then disengage and remove the upper cover of the dashboard. After that, we will have to remove the inner cover of the fuse box. By doing so, we will have reached the fuse box and its fuses.


Posted on 29 January 2024 by ScegliAuto



Positioning of the internal fuse box of the Iveco Stralis.
IVECO Stralis Below we will see the steps that will allow us to locate the internal fuse box of the Iveco Stralis, following the instructions below. First of all,
Location of the internal fuse box on the Iveco Stralis 450
IVECO Stralis In today's video we will see the positioning of the Iveco Stralis 450 internal fuse box. First of all, we get on board the passenger compartment and
How to replace the front headlight bulbs in the Iveco Stralis truck?
IVECO Stralis As we can see in this tutorial, replacing the front headlight bulbs in the Iveco Stralis truck is an extremely simple and fast operation. First of al

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos