Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
Let's see how to check and eventually replace the fuses on a Honda SH 150. First you need to open the glovebox, on the lower part of the glovebox you will find a black box, open it by levering it on the right side, inside there are red fuses that are 10A, while the blue fuses are 15A. To extract the fuse we need the fuse extractor located inside the toolbox, we hook the fuse to be checked or changed well and levering it up and down we extract it. To check if it needs to be replaced, we must observe the jumper inside the fuse, if the jumper is whole the fuse must not be changed, while if the jumper is broken it must be changed. Put the new fuse where it was removed and of the same amperage. To reinsert the new fuse, all we have to do is push it slowly inside, making sure it has entered well, at this point we can close the box and also the glove box.
Posted on 11 July 2022 by ScegliAuto
How to reset the oil warning light on Honda PCX 150
(Various brands) Various In this video tutorial you can see how you can reset the oil warning light on Honda PCX 150, following a few simple steps that will guide you towards
How to reset the oil light on the Honda Sh 150.
(Various brands) Various We use the key to turn on the dashboard of the SH 125. We turn on the dashboard with the key (we don't need to start the engine). When the display of
How to open the trunk of the Honda SH 150 or 350.
(Various brands) Various You have just purchased the new model of the Honda SH but you have no idea how to open the trunk if the battery is dead? We have got you covered with Other guides that may interest you |
Frequently Asked QuestionsDisassembly of the gear knob on the Lancia Ypsilon 2Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.060
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |