Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Clutch Cable of the Kia Picanto?

Model: Kia Picanto MK 3, JA - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Clutch

See other generations:
Video tutorial

To adjust the clutch cable of the Kia Picanto, open the bonnet to access the components inside the engine bay: to reach the cable, you will need to remove some components on the right side, such as the battery and the air filter. Under these, you will find the clutch cable, which must be adjusted by tightening or loosening the bolt located at the end of the cable.

This will make the pedal harder or softer; after adjustment, you can reinstall all components and close the bonnet.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Adjust the Clutch Cable on a Kia Picanto
How to Adjust the Clutch Cable on a Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) This guide provides the main instructions on how to adjust the clutch cable on a Kia Picanto. First, open the bonnet and locate the clutch cable situ…
How to adjust the clutch pedal on the Kia Picanto
How to adjust the clutch pedal on the Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) In this guide, you will find instructions to adjust the clutch pedal on the Kia Picanto. First, open the bonnet of the vehicle and locate the clutch …
Replacing the Clutch Cable on the Kia Picanto
Replacing the Clutch Cable on the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) The instructions in this guide will illustrate how to remove and replace the clutch cable on the Kia Picanto. First, open the vehicle's bonnet and lo…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos