Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on an MG 7

Model: (Various brands) Rover 75 MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Diesel fuel filter

Video tutorial

In this video tutorial, you will see how to remove and replace the fuel filter on the MG 7, as well as on the Rover 75. First, open the bonnet of your car by pulling the lever inside, and start disconnecting the diesel pipes from the fuel filter, also disconnecting the electrical connector; then unscrew the filter from the bracket to remove it, as shown in the video.

At this point, replace the cartridge with the new one, inserting it in the correct orientation; reconnect the pipes and the electrical connector, following the video until the end!


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter of the Rover 75
Replacing the Cabin Air Filter of the Rover 75
(Various brands) Rover 75 (1999-2005 / MK 1) Today we will go through the step-by-step instructions on how to remove and replace the cabin air filter or pollen filter of the Rover 75. First, ope…
How to Replace the Cabin Air Filter on the Rover 75
How to Replace the Cabin Air Filter on the Rover 75
(Various brands) Rover 75 (1999-2005 / MK 1) If you need to replace the cabin air filter on this model, you can find the instructions below. The first step is to open the bonnet and remove the s…
How to Replace the Cabin Filter of the Rover 75
How to Replace the Cabin Filter of the Rover 75
(Various brands) Rover 75 (1999-2005 / MK 1) To replace the cabin filter of the Rover 75, open the bonnet to access the components inside the engine bay. You will need to unscrew the bolts secur…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos