Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to set the time on the Iveco Acco?

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Instrument cluster
Operation: How to set the time on the Iveco Acco?

To manually change the displayed time on your Iveco Adecco dashboard, simply follow this simple procedure. First, enter the vehicle and turn on the instrument panel. Immediately after, press and hold the button located below the speedometer for about three seconds and release it as soon as the display starts flashing. At this point, use the button located below the tachometer to select your preferred format (12H or 24H). Then, move to the time and use the same buttons to change both the hours and minutes.


Posted on 4 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Vari - Why did the speedometer stop working? Read Answer
    • Vari - Why doesn't the EDC light turn on? Read Answer
    • Vari - What does the yellow light with a padlock on one's car indicate? Read Answer
    • Vari - What does the red key light on the scooter indicate? Read Answer
    • Vari - What does the red warning light with the wrench symbol mean? Read Answer
    • Vari - What does EPS mean on a car dashboard? Read Answer
    • Vari - What does the warning light with a triangle and an exclamation mark inside mean? Read Answer
    • Vari - How do you turn off the warning light on the Majesty 400? Read Answer
    • Vari - Why is the Mercedes start-stop not working? Read Answer
    • Vari - What to do to reset the engine malfunction light? Read Answer
    • Vari - What does the oil light on the Suzuki GSXR 600 indicate? Read Answer
    • Vari - What does error code 59 indicate on the 2017 Chevrolet Sonic? Read Answer
    • Vari - What does the red warning light with a triangle and a car mean? Read Answer
    • Vari - What are the three main categories of warning lights on the instrument panel? Read Answer
    • Vari - Why does the ESC light turn on in cars? Read Answer
    • Vari - Why is the engine light on the scooter flashing? Read Answer
    • Vari - Why is the Mercedes TPMS not working? Read Answer
    • Vari - What problems does the EPC warning light give? Read Answer
    • Vari - What is the meaning of car error codes? Read Answer
    • Vari - What does the red airbag warning light in the car indicate? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos