Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speakers in the Volkswagen Fox?

Model: Volkswagen Fox MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Speaker

See other generations:
Video tutorial

This tutorial shows how to replace the speakers in the Volkswagen Fox, a very simple and quick operation. First, ensure that the key is not in the ignition, then open the relevant door, unclip the window switch console, and disconnect the corresponding connector.

Next, unscrew all the fixing screws of the panel, pry along its perimeter, and separate it from the door. At this point, you can unscrew the speaker screws, disconnect the power, and install the replacement by following the reverse procedure.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

Where to find and how to reach the fuse box of a Volkswagen Fox?
Where to find and how to reach the fuse box of a Volkswagen Fox?
Volkswagen Fox (2003-2011 / MK 1) Good morning, today’s objective is to find out where the fuse box of your Volkswagen Fox is located and how to access it. Start by sitting in the dri…
Where to Find the Fuse Box of the Volkswagen Fox
Where to Find the Fuse Box of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) To find the fuse box of your Volkswagen Fox (2003-2011) easily and safely, follow these simple steps. First, enter the cabin and ensure the car is co…
How to replace the factory radio of the Volkswagen Fox.
How to replace the factory radio of the Volkswagen Fox.
Volkswagen Fox (2003-2011 / MK 1) In this guide, we will see the instructions necessary to disassemble and replace the stock radio of the Volkswagen Fox. First, let's get inside the v…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos