Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the door panel of the Volkswagen Tiguan?

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Door trim panel

See other generations:
Video tutorial

To replace the door panel on the Volkswagen Tiguan, it is necessary to loosen the screws that hold it to its corresponding housing: these screws will be found under the handrail trim, above the storage compartment, and in the central lower part of the panel.

Once all the screws have been loosened, it will be possible to detach the panel by also disconnecting all the underlying connectors: now that the panel has been removed, it will be possible to connect the new one to the connectors and insert it into its housing, fixing everything by reinserting the bolts.


Posted on 20 December 2024 by ScegliAuto


Related tutorials

Disassembly of the front door panel of the Volkswagen Tiguan
Disassembly of the front door panel of the Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) The steps illustrated in this guide will show us how to disassemble and remove the front door panel of the Volkswagen Tiguan. First, we open the fron…
How to Remove the Door Panel on a Volkswagen Tiguan
How to Remove the Door Panel on a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Before you start, open the door of your Volkswagen Tiguan. Begin by unclipping and removing the inserts from the door panel using a thin but sturdy t…
How to Remove and Install the External Wing Mirror on a Volkswagen Tiguan
How to Remove and Install the External Wing Mirror on a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Here’s how to remove and install the external wing mirror on a Volkswagen Tiguan (passenger side). After removing the door panel: disconnect the batt…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos