Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the service light on the Amarok

Model: Volkswagen Amarok MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

In this article, we will explain how to reset the service light on the Volkswagen Amarok. This procedure is useful in case the light remains on even after a service has been performed.

To reset the light, you need to press and hold the 0.0/SET button, then insert the key and start the ignition. After starting the ignition, release the button and press the clock button, then turn off the ignition.

Finally, restart the ignition to verify that the procedure was successful. As we have seen, no tools or software are needed.


Posted on 16 January 2025 by ScegliAuto


Related tutorials

How to reset the "Service" indicator on a Volkswagen Amarok?
How to reset the "Service" indicator on a Volkswagen Amarok?
Volkswagen Amarok (2022-2026 / MK 2) To reset the "Service" light on a Volkswagen Amarok, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel …
How to reset the service light on the VW Amarok
How to reset the service light on the VW Amarok
Volkswagen Amarok (2010-2021 / MK 1) The steps to reset the service light on a 2017 Volkswagen Amarok are as follows: - turn on the instrument panel; - press the SET button, located on t…
How do you reset the Service light of the Volkswagen Amarok?
How do you reset the Service light of the Volkswagen Amarok?
Volkswagen Amarok (2010-2021 / MK 1) From the instrument panel of the Volkswagen Amarok, you can reset the Service light by holding down the 0.0/SET button located in the central lower p…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos