Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front windshield wipers of the Volkswagen T-Roc

Model: Volkswagen T Roc MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Windshield wipers

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the front wipers of the Volkswagen T-Roc. First of all, let's move to the front of the car and start by lifting the wiper arm; then press the small button on the clip to simultaneously remove the wiper blade, as shown in the video.

At this point, let's proceed to install the new front wiper blade, of the correct type and size; in the same way, we will replace, if necessary, the other wiper blade and the rear wiper blade!


Posted on 29 April 2025 by ScegliAuto


Related tutorials

Where are the fuses located in the Volkswagen T-Roc?
Where are the fuses located in the Volkswagen T-Roc?
Volkswagen T Roc (2017-2025 / MK 1) The fuses of the Volkswagen T-Roc are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be…
Where is the Fuse Box on a Volkswagen T-Roc?
Volkswagen T Roc (2017-2025 / MK 1) If you are unsure where the fuse box is located in your Volkswagen T-Roc, don't worry. Just follow this guide carefully to locate it without any diff…
Where to Find and How to Access the Fuse Box on a Volkswagen T-Roc
Volkswagen T Roc (2017-2025 / MK 1) Hello, today we will discover where to find and how to access the fuse box on your Volkswagen T-Roc. Start by opening the front bonnet, releasing the…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos