Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on the Volkswagen Amarok?

Model: Volkswagen Amarok MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light that is shown on the instrument panel of the Volkswagen Amarok, you will need to press and hold the button located on the right side of the instrument panel: while continuing to hold it down, you will be able to insert the ignition key into the ignition switch and turn it to start the instrument panel.

Once the instrument panel is turned on, you can release the button and then press the one on the left side: by doing so, you will notice that the Service light has disappeared and you can turn off the instrument panel by removing the key from the ignition switch.


Posted on 4 September 2025 by ScegliAuto


Related tutorials

Volkswagen Amarok (2010-2021 / MK 1) To reset the Service light on the Volkswagen Amarok, press and hold the 0.0/SET button located at the bottom centre of the instrument cluster while i…
Volkswagen Amarok (2010-2021 / MK 1) From the instrument panel of the Volkswagen Amarok, you can clear the Service light by pressing and holding the "0.0/SET" button located in the centr…
Volkswagen Amarok (2010-2021 / MK 1) You can clear the AdBlue warning light that appears on the dashboard of the Volkswagen Amarok by connecting a diagnostic tool to the vehicle's OBD po…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos