Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on the Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Service warning light

Today we will see the instructions that will allow us to reset the maintenance service light for the oil change of the Volkswagen Golf. First of all, we get into the car and start pressing and holding the reset button on the instrument panel found in the central part; turn on the instrument panel and release the button, pressing it again only once to reset the maintenance key, as shown in the video. At this point, we check on the car settings, from the central display, that the service mileage counter has been reset!

Posted on 13 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volkswagen Golf
How to Reset the Service Light on a Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Learn how to reset and reconfigure the service on a Volkswagen Golf 7: switch on the instrument cluster of your car with the appropriate remote key; …
How to reset the Service light on a Volkswagen Golf?
How to reset the Service light on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To reset the Service light on a Volkswagen Golf, press and hold the right button located at the bottom of the instrument cluster. While holding it, t…
How to Reset the Service Light and Inspection Light on a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This short video shows you how to reset the service light and inspection light on a Volkswagen Golf 7 after performing the usual service. Resetting t…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos