Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the third row of the rear seats from the Volkswagen ID Buzz.

Model: Volkswagen ID.Buzz MK 1 - Years 2022-2026
Part: Seat

The instructions provided in this guide will show us how to disassemble and replace the third row of rear seats in the Volkswagen ID Buzz. First, let's open the rear hatch of the trunk and start lowering the backrests of the third row of seats; then, we will pull the strap located at the bottom, sliding the seat backward to remove it from the track, as shown in the video. At this point, if necessary, we can also remove the other seat, thereby increasing the cargo volume of the trunk; we will reassemble the rear seats by applying the reverse procedure.

Posted on 10 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Key Battery for the Volkswagen ID Buzz
How to Change the Key Battery for the Volkswagen ID Buzz
Volkswagen ID.Buzz (2022-2026 / MK 1) The procedure to correctly replace the battery in your Volkswagen ID Buzz key is identical to that used for keys of other Volkswagen models. Simply f…
Where are the fuses located in the Volkswagen ID.Buzz?
Volkswagen ID.Buzz (2022-2026 / MK 1) The fuses of the Volkswagen ID.Buzz are contained within the appropriate fuse boxes that are present on the vehicle: in this type of vehicle it is po…
Resetting the Tyre Pressure Warning Light on the Volkswagen ID Buzz
Resetting the Tyre Pressure Warning Light on the Volkswagen ID Buzz
Volkswagen ID.Buzz (2022-2026 / MK 1) Below are the steps to reset the tyre pressure warning light on the Volkswagen ID Buzz; before recalibrating the TPMS sensors, ensure all four tyres …

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos