Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Front Fog Lights on the Volkswagen Golf 6

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Fog lights

In today's tutorial, you will learn how to remove and replace the front fog lights on the sixth generation Volkswagen Golf, in the variant version. First, remove the plastic cover of the fog light by pulling it towards you to detach it; then use a T25 Torx spanner to unscrew the screws securing the fog light unit, as shown in the video. At this point, remove the fog light and disconnect the electrical connector of the bulb to replace it; finally, refit the new fog light by reversing the procedure!

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the front fog lights of the Volkswagen Golf
Replacing the front fog lights of the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today's guide will show you how to remove and replace the front fog lights or their bulbs on the Volkswagen Golf. In this video, we will see the disa…
Replacing the Front Fog Light Bulbs on a Volkswagen Golf
Replacing the Front Fog Light Bulbs on a Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below are the instructions that will allow you to remove and replace the bulbs of the front fog lights on a Volkswagen Golf. First, move to the side …
How to Activate the Fog Lights on the Volkswagen Golf
How to Activate the Fog Lights on the Volkswagen Golf
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) In this guide, you will find instructions on how to activate the front and rear fog lights on the Volkswagen Golf. First, get inside the vehicle and …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos