Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Fuel Tank from a Volkswagen Golf 2.0 TDI

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008

This guide shows the main steps to remove the fuel tank from the Volkswagen Golf, following the instructions below. First, lift the vehicle and start by disconnecting the fuel lines from the tank; then unscrew all the screws found on the sides, fixed to the brackets, and remove the various hoses to take out the tank, as shown in the video. Next, it illustrates how to remove the entire rear subframe, disassembling it along with the suspension arms and braking system, following the video to the end!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1983-1992 / MK 2, Golf 2) Today's main instructions will show you how to remove and replace the fuel tank on the Volkswagen Golf. First, open the boot lid and begin disassembl…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) As seen in this tutorial, removing the fuel pump in the Volkswagen Golf MK4 TDI is a very simple and quick task. Before proceeding, disconnect the ne…
Volkswagen Golf (1974-1983 / Golf 1, MK 1) Here are the main instructions that will allow you to remove and replace the fuel tank of the Volkswagen Golf. First, raise the vehicle and start uns…

    Frequently Asked Questions

    • Golf 1997-2003 - How many liters of fuel reserve does the Volkswagen Golf have? Read answer
    • Golf 2019-2026 - What problems does the Volkswagen Golf 8 infotaintment system have? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos