Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Volkswagen ID 3

Model: Volkswagen Id 3 MK 1 - Years 2019-2026
Part: Door trim panel

In this video tutorial, you will learn how to remove the front door panel, thereby replacing the speakers, of the Volkswagen ID 3. First, open the front door and start prying around the handle sides using a thin plastic lever; then disconnect the electrical connector of the switch panel, subsequently removing the entire door panel, as illustrated in the video. At this point, replace the speakers by unscrewing the screws and disconnecting the speaker cable; then reassemble everything by applying the reverse procedure!

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Handle of the Volkswagen ID.3
Removing the Rear Door Handle of the Volkswagen ID.3
Volkswagen Id 3 (2019-2026 / MK 1) Let's see how to proceed if for any reason you need to remove the handle of the door on the Volkswagen ID.3. Open the door where the handle to be rem…
Resetting the Trip Meter on Volkswagen ID 3
Resetting the Trip Meter on Volkswagen ID 3
Volkswagen Id 3 (2019-2026 / MK 1) Today we will discover the instructions that will allow us to reset the trip meter on the Volkswagen ID 3. First, get into the vehicle and turn on th…
Where to Find the Fuse Box of the Volkswagen ID 3
Where to Find the Fuse Box of the Volkswagen ID 3
Volkswagen Id 3 (2019-2026 / MK 1) The fuse box of your Volkswagen ID 3 is located inside the cabin. To locate it, follow the steps outlined in this guide. First, get into the driver's…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos