Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Id 3
  6. : Disassembly of the rear door handle of the Volkswagen ID3.

Volkswagen Id 3 - Video tutorial

Model: Volkswagen Id 3 MK 1 - Years 2019-2024
Part: Handle
Operation: Disassembly of the rear door handle of the Volkswagen ID3.

Let's see how to proceed if, for any reason, you need to remove the door handle of the Volkswagen ID 3. Open the door where the handle to be removed is located. In the frame next to the lock, near the outer edge, you will notice a hole where you will insert a long-blade screwdriver. With the help of a flashlight, release the handle lock. The operation is not very easy as you have to work "blindly," but with a little patience and skill, you can manage to do it. The handle will then be held only by the opening control cables, which you will disconnect.


Posted on 14 October 2023 by ScegliAuto

Other guides that may interest you

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos