Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement

Model: Volkswagen Sharan 7M, MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Windshield wipers

See other generations:
Video tutorial

To replace the wiper blades, first position the wiper arms in maintenance mode: when they are in the resting position, they cannot be lifted. Turn on the ignition, then turn it off and immediately lower the wiper control lever.

This will raise the wiper arms to a vertical position. In this position, you can lift the wiper arm and detach the wiper blade by pressing the safety latch with a small screwdriver.

Then, simply insert the new blade and slide it until the latch clicks into place.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

How to Replace the Windscreen on a Volkswagen Sharan
Volkswagen Sharan (1995-2010 / 7M, MK 1) In today's tutorial video, we will see a very simple and effective method to remove and replace the windscreen on a second-generation Volkswagen Shar…
Where are the fuses of the Volkswagen Sharan?
Where are the fuses of the Volkswagen Sharan?
Volkswagen Sharan (2010-2023 / 7N, MK 2) In the Volkswagen Sharan, you can find the fuses inside the designated boxes that contain them: this type of vehicle has two boxes that serve this fu…
Where are the Fuses Located on the Volkswagen Sharan?
Where are the Fuses Located on the Volkswagen Sharan?
Volkswagen Sharan (2010-2023 / 7N, MK 2) On the Volkswagen Sharan, all fuses are housed within their respective fuse boxes installed in the vehicle: there are two boxes that contain all the …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos