Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel of the Volkswagen T-Roc

Model: Volkswagen T Roc MK 1 - Years 2017-2025
Part: Door trim panel

In today's video tutorial, learn how to remove and replace the rear door panel of the Volkswagen T-Roc. First, open the rear door of your car and start by removing the plastic cover of the grab handle, prying it off from the sides; then unscrew the fixing screws located underneath using a Torx screwdriver, as illustrated in the video. Next, remove the small reflector found at the bottom by prying it off from the sides to detach and remove the panel; finally, disconnect the electrical connector and the handle cable!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the door panel from the Volkswagen T-Roc
How to remove the door panel from the Volkswagen T-Roc
Volkswagen T Roc (2017-2025 / MK 1) In this guide, you will find instructions on how to remove and detach the door panel from the Volkswagen T-Roc. First, open the car door and start by…
How to disassemble the external handle of the front door of the Volkswagen T-Roc
How to disassemble the external handle of the front door of the Volkswagen T-Roc
Volkswagen T Roc (2017-2025 / MK 1) Today's step-by-step instructions will show us how to disassemble and replace the external handle of the front door of the Volkswagen T-Roc. First, w…
How to Remove the Door Panel on the Volkswagen T-Roc?
How to Remove the Door Panel on the Volkswagen T-Roc?
Volkswagen T Roc (2017-2025 / MK 1) To remove the door panel on the Volkswagen T-Roc, detach the trim along the armrest at the centre of the panel and the cover inside the handle housin…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos