Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Spare Wheel on the Volkswagen Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Wheel

This guide outlines the steps to install the spare wheel in case of a puncture on the Volkswagen Golf. First, open the boot lid and take out the spare wheel and all the necessary replacement kit; then, use the appropriate socket wrench to loosen the wheel nuts, raising the vehicle with the jack to remove the punctured wheel, as shown in the video. Next, install the spare wheel, tightening the bolts in a criss-cross pattern, and return all tools to the boot!

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to install the rear camera on the Volkswagen Golf
How to install the rear camera on the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today's main instructions will show us the process of installing the rear parking camera on the Volkswagen Golf. First, we open the rear hatch and be…
How to Replace the Clutch Cylinder on a Volkswagen Golf?
How to Replace the Clutch Cylinder on a Volkswagen Golf?
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To replace the clutch cylinder on a Volkswagen Golf, open the bonnet to access the rear of the engine bay. Here, locate the screws securing the clutc…
How to install or replace the parking sensors of the Volkswagen Golf
How to install or replace the parking sensors of the Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Today's instructions will show us how to install or possibly replace the parking sensors of the Volkswagen Golf. The rear parking sensors are install…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos