Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Reversing Camera on the Volkswagen Golf 7

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

This guide shows how to install the reversing camera kit for rear visibility when parking on the Volkswagen Golf seventh series. First, adapt the reversing camera to the vehicle's onboard computer by making the necessary electrical connections; to do this, you will need to remove the radio unit, as shown in the video.

At this point, route all the wires (preferably between the pillars) until you reach the rear of the vehicle; once at the tailgate, install the camera following the instructions in the manual.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Install a Reversing Camera on the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To install the reversing camera on the Volkswagen Golf 6, connect the camera wiring to the car radio, routing all wires under the seals or beneath th…
How to Install a Reversing Camera on the Volkswagen Golf
How to Install a Reversing Camera on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this brief guide, you will see the steps to install the reversing camera for parking manoeuvres on the Volkswagen Golf. First, obtain the suitable…
How to connect a reverse camera to a Volkswagen Golf 7.5
How to connect a reverse camera to a Volkswagen Golf 7.5
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Installing an aftermarket reverse camera (from AliExpress, code 1005006398970934 for £67.39 with free delivery) on the Golf 7.5 is a complex operatio…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos