Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

In this brief guide, you will see the steps to install the reversing camera for parking manoeuvres on the Volkswagen Golf. First, obtain the suitable camera for your car model to ensure compatibility; then open the rear hatch and mount the reversing camera, routing the wiring from the bottom, as shown in the video.

Next, bring the wiring to your multimedia system to connect the camera to the central display; then reassemble everything, following the video tutorial to the end!


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To install the reversing camera on the Volkswagen Golf 6, connect the camera wiring to the car radio, routing all wires under the seals or beneath th…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) This guide shows how to install the reversing camera kit for rear visibility when parking on the Volkswagen Golf seventh series. First, adapt the rev…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's main instructions will show you how to install the rear camera for parking manoeuvres on the Volkswagen Golf. First, open the tailgate and st…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos