Do it yourself
Frequently asked questions about cars and motorcycles

How to Install a Reversing Camera on the Volkswagen Golf 6?

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Checks and maintenance

To install the reversing camera on the Volkswagen Golf 6, connect the camera wiring to the car radio, routing all wires under the seals or beneath the pillar covers. Once the cables reach the tailgate, detach the inner panel by unscrewing the fixing screws. You can then insert the reversing camera and secure it in its housing; after installation, check that the camera is functioning by remounting the tailgate panel.

Updated on 11 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this brief guide, you will see the steps to install the reversing camera for parking manoeuvres on the Volkswagen Golf. First, obtain the suitable…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This guide shows how to install the reversing camera kit for rear visibility when parking on the Volkswagen Golf seventh series. First, adapt the rev…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) In order to install the rear camera of the Volkswagen Golf, you need to loosen the screws that secure the inner panel of the tailgate in place: once …

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos