Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing the Rear Camera on the Volkswagen Golf

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

Today, let’s look at the main instructions for installing the rear camera on the Volkswagen Golf. First, open the boot lid and position the rear camera above the number plate, centring it perfectly. Then, route the electrical wiring along the side pillars until it reaches the connections for the rear view screen, as shown in the video.

At this point, complete the adjustment of the rear camera after turning everything on and connecting the reverse sensor to activate the camera.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to Install the Rear Camera on the Volkswagen Golf
How to Install the Rear Camera on the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's main instructions will show you how to install the rear camera for parking manoeuvres on the Volkswagen Golf. First, open the tailgate and st…
Guide to Installing the Rear Camera on a Volkswagen Golf
Guide to Installing the Rear Camera on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) This guide outlines the main steps to install the rear parking camera on a Volkswagen Golf. First, open the boot and begin removing the rear hatch pa…
How to Install a Reversing Camera on the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To install the reversing camera on the Volkswagen Golf 6, connect the camera wiring to the car radio, routing all wires under the seals or beneath th…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos