Do it yourself
Frequently asked questions about cars and motorcycles

Installation guide for the rear camera of the Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019

In this guide, we will see the main steps that will allow us to install the rear camera for parking maneuvers on the Volkswagen Golf. First, we open the rear hatch of the trunk and begin to disassemble and remove the rear hatch panel; then we install the camera and run the wiring to reach the dashboard display, as shown in the video. At this point, we check the operation of the rear camera and that it turns on when the reverse gear is engaged, finally adjusting the angle to improve visibility.

Posted on 24 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Today we will see the main instructions useful for installing the rear camera of the Volkswagen Golf. First, we open the rear hatch of the trunk and …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today's main instructions will show us the process of installing the rear parking camera on the Volkswagen Golf. First, we open the rear hatch and be…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To install the reversing camera on the Volkswagen Golf 6, connect the camera wiring to the car radio, routing all wires under the seals or beneath th…

    Frequently Asked Questions

    • Golf 1997-2003 - How many liters of fuel reserve does the Volkswagen Golf have? Read answer
    • Golf 2019-2026 - What problems does the Volkswagen Golf 8 infotaintment system have? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos