Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Volkswagen Golf 4?

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Door trim panel

To remove the door panel on a Volkswagen Golf 4, loosen the screws that secure it to its housing: these screws will be located in the central lower part of the panel and on its right side, just below the rear-view mirror. Then, use a tool to pry off the window lift knob and the trim of the armrest, loosening the two additional screws underneath. At this point, the panel can be completely detached by disconnecting the underlying connectors and inserting a new replacement part.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Interior Panel of the Tailgate of the Volkswagen Golf?
How to Remove the Interior Panel of the Tailgate of the Volkswagen Golf?
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this guide, you will discover the instructions to remove the interior panel of the tailgate of the Volkswagen Golf in simple steps. First, open th…
Guide to Removing the Tailgate on a Volkswagen Golf Plus
Guide to Removing the Tailgate on a Volkswagen Golf Plus
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) This guide provides the main instructions for removing and replacing the tailgate on a Volkswagen Golf Plus. First, open the tailgate and start unfas…
How to remove the door panel of the VW Golf 5
How to remove the door panel of the VW Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Removing the door panel of the Volkswagen Golf 5 is a very simple operation, which can be done independently. Let's start by removing the window swit…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos