Do it yourself
Frequently asked questions about cars and motorcycles

How to remove and replace the headlining in the Volkswagen Golf

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008

In this video tutorial, you will see step-by-step instructions on how to remove and replace the headlining in the Volkswagen Golf. First, get inside the vehicle and start by removing the interior light fixture, prying at the sides and disconnecting all the electrical connectors found at the back; then remove the sun visors and the grab handles by unscrewing the fixing screws, as shown in the video. At this point, unclip all the side plastic pillars to remove the headlining from the sides, replacing it with the new one!

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) There are three things to know about car headlinings: The first is to avoid using Bostik to glue the fabric, as it dampens the material and does not …
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today we will discover the instructions that will allow us to disassemble and replace the panoramic roof of the Volkswagen Golf. First, we get on boa…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today we will see the instructions that will allow us to disassemble and eventually replace the ceiling or the internal lining of the roof of the Vol…

    Frequently Asked Questions

    • Golf 1997-2003 - How many liters of fuel reserve does the Volkswagen Golf have? Read answer
    • Golf 2019-2026 - What problems does the Volkswagen Golf 8 infotaintment system have? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos