Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the cabin filter located in the Volkswagen Caddy?

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: Cabin air filter

This video shows where the cabin filter is located in the Volkswagen Caddy and how to proceed if you need to replace it, a very simple and quick operation. As shown, the filter is located in the lower area of the dashboard, on the passenger side. To access it and subsequently replace it, first go underneath the dashboard, then unclip the left side panel and open the long rectangular door. Next, remove the filter, clean the inside of the housing, and insert the replacement.

Updated on 24 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter of the Volkswagen Caddy
Replacing the Cabin Air Filter of the Volkswagen Caddy
Volkswagen Caddy (2003-2020 / MK 3, 2K) Here are the main instructions to help you remove and replace the cabin air filter of the Volkswagen Caddy. First, get inside the vehicle and start b…
How to Replace the Pollen Filter on Volkswagen Caddy 3
How to Replace the Pollen Filter on Volkswagen Caddy 3
Volkswagen Caddy (2003-2020 / MK 3, 2K) In this video tutorial, see how to replace the pollen filter on the Volkswagen Caddy 3 by following these simple steps: first, purchase a new pollen …
How to Change the Cabin Air Filter on a Volkswagen Caddy
How to Change the Cabin Air Filter on a Volkswagen Caddy
Volkswagen Caddy (2003-2020 / MK 3, 2K) To change the cabin air filter in a Volkswagen Caddy, enter from the passenger side and go under the glove compartment. Unscrew the two plastic screw…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos