Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and install the rear camera of the Volkswagen Passat CC.

Model: Volkswagen Passat Cc MK 1 - Years 2008-2018

The steps outlined in this guide will show us the process of replacing and installing the rear camera of the Volkswagen Passat CC. First, we open the rear trunk door and begin to disassemble and remove the door panel, unscrewing the fixing screws; then we disconnect the electrical wiring and unscrew the camera screws to remove it, as shown in the video. At this point, if necessary, we install the new camera, passing the new wiring and checking its operation; we adjust the camera perfectly, until we obtain an optimal display.

Posted on 7 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear sofa of the Volkswagen Passat CC
How to disassemble the rear sofa of the Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) In this short guide, we will see the instructions that will allow us to disassemble and remove the rear seat of the Volkswagen Passat CC, accessing i…
How to Remove the Roof Lining on a Volkswagen Passat CC
How to Remove the Roof Lining on a Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) Follow this simple guide to remove the roof lining or upper trim of the roof on the Volkswagen Passat and Passat CC. First, get inside the vehicle an…
How to Remove the Roof Lining of the Volkswagen Passat CC
How to Remove the Roof Lining of the Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) The instructions in this guide will show you how to remove and replace the roof lining of the Volkswagen Passat CC. First, get inside the cabin and s…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos