Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the horn of the Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019

Today we will see the instructions that will allow us to disassemble and replace the horn or the acoustic warning device of the Volkswagen Golf, in simple and quick steps. First of all, we open the hood of the car and start by lifting the car and removing the front right wheel; then we unscrew the screws of the horn fixing bracket, disconnecting the electrical connector afterwards, as shown in the video. At this point, we remove and replace the horn with the new one, checking its operation, finally reassembling the front wheel arch and the wheel.

Posted on 15 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In today's video, you will see how to activate and deactivate the alarm on the Volkswagen Golf 7. The procedure involves unlocking the door with a tr…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video tutorial, you can see how to reset the airbag light on the Golf 5 by following simple steps that will guide you to proper vehicle manag…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In today's tutorial, you will learn how to remove and replace the horn on the Volkswagen Golf by following these simple steps. First, locate the horn…

    Frequently Asked Questions

    • Golf 1997-2003 - How many liters of fuel reserve does the Volkswagen Golf have? Read answer
    • Golf 2019-2026 - What problems does the Volkswagen Golf 8 infotaintment system have? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos