Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Vento
    4. : 2010-2022 (A05, Polosedan)

Volkswagen Vento Years 2010-2022 (A05, Polosedan)

Volkswagen Vento (2010-2022 / Polosedan, A05)
How to Disable the Alarm System on the Volkswagen Vento
Today, you will see the instructions that will allow you to disable the alarm system on the Volkswagen Vento. First, get into the vehicle on the driver's side …Read all…
Posted on 9 July 2026 by ScegliAuto
Volkswagen Vento (2010-2022 / Polosedan, A05)
How to Remove the Fuel Cap and Flap on a Volkswagen Vento
This guide provides the main instructions on how to remove and replace the fuel cap and flap on a Volkswagen Vento. First, open the fuel flap and begin …Read all…
Posted on 3 July 2026 by ScegliAuto
Volkswagen Vento (2010-2022 / Polosedan, A05)
How to Replace the Steering Wheel Airbag of the Volkswagen Vento
Today's instructions will guide you through the process of removing and replacing the steering wheel airbag of the Volkswagen Vento in simple and quick steps. …Read all…
Posted on 16 May 2026 by ScegliAuto
Volkswagen Vento (2010-2022 / Polosedan, A05)
How to Reset the Service Light on a Volkswagen Vento?
In this tutorial, we will see how to reset the service light on a Volkswagen Vento, a very simple and quick operation to perform only after completing all …Read all…
Posted on 19 April 2026 by ScegliAuto
Airbag (2) Shocks (2) Car stereo (1) Battery (1) Checks and maintenance (3) Air filter (2) Diesel fuel filter (1) Light bulb (1) Tail light bulb (1) Heater core (1) Fuse box (9) Warning light – error code (1) Service warning light (6) Fuel cap (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos