Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S70
    4. : Service warning light

Volvo S70 - Service warning light

Service Warning Light Volvo S70 (1996-2000 / mk 1)

Volvo S70 (1996-2000 / MK 1)
Service Reset on a Volvo S70
In today's video, the entire procedure necessary to reset the service light on a Volvo S70, produced from 1996 to 2000, is shown. This operation is very simple …Read all…
Posted on 30 May 2026 by ScegliAuto
Volvo S70 (1996-2000 / MK 1)
How to reset the service in the Volvo S70?
In this tutorial, we will see how to reset the service light in the Volvo S70, an operation that is extremely simple and quick, to be performed only after …Read all…
Posted on 10 January 2026 by ScegliAuto
Volvo S70 (1996-2000 / MK 1)
Service Light Reset Instructions
If the SERVICE warning light is illuminated on the instrument cluster, it means it's time for maintenance: after performing the service with an oil change and …Read all…
Posted on 27 February 2026 by ScegliAuto
Alternator (1) Antenna (1) Car stereo (1) Anti-roll bar (1) Bushings (1) Spark plugs (1) Key (1) Timing belt (1) V-belt (1) Checks and maintenance (2) Dashboard (1) Brake rotors (2) Rear bench seat (1) Cabin air filter (3) Fuel filter (1) Parking brake (1) (1) Accessory kit (1) Side marker bulb (1) Tail light bulb (1) Instrument panel light (1) Handle (2) Engine (9) Starter motor (2) Engine oil (1) Door trim panel (3) Windshield (1) Brake pads (1) Shift knob (2) Power window switch (1) Radiator (1) Seat (1) Axle shaft (2) Side mirror (2) Service warning light (3) Brake drums and shoes (1) Center console tunnel (1) Turbocharger (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos