Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S70
    4. : Instructions for resetting the service light

Volvo S70 - Video tutorial

Model: Volvo S70 MK 1 - Years 1996-2000
Part: -board computer
Operation: Instructions for resetting the service light

If the SERVICE warning light comes on on the instrument panel display, it means that the time has come to carry out maintenance: therefore, after carrying out the service and replacing the engine oil and filters, the warning light must be reset. ; this procedure is manual and does not require the aid of diagnostic instruments: it is carried out manually using the reset button for partial kilometers; with the ignition off, press and hold the reset partial kilometers button and turn on the ignition by continuing to press the button until the warning light starts flashing (about 10 seconds); at this point release the button and switch off the ignition.


Posted on 30 August 2023 by ScegliAuto



Replacement light bulb made side
Volvo S70 (1996-2000 / MK 1) Open the front hood and make sure it is supported safely. Inserting your fingers between the light and the light, press the fixing tab of the light i
How to replace the dashboard lights of the Volvo 850 - S70.
Volvo S70 (1996-2000 / MK 1) In this short and simple guide, we will see how to disassemble and replace the light bulbs of the instrument panel of the Volvo 850 and S70. First, w
Rear light bulb replacement
Volvo S70 (1996-2000 / MK 1) Open the rear lid and make sure that it is supported safely. Remove the carpeted flap on the side panel: at this point it is possible to see the lamp

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos