Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob on a Volvo V40

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Shift knob

In today's tutorial, you will see how to remove and replace the gear knob on a Volvo V40, as well as the S40, in simple and quick steps. First, get inside the vehicle and start by unfastening the gear gaiter from the bottom; then press the two side tabs and pull the gear knob upwards to remove it from the lever, as shown in the video. At this point, replace the knob with the new one of the correct type; secure it to the gear gaiter and then fit it onto the lever, following the tutorial until the end!

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure on a Volvo V40
How to Reset the Tyre Pressure on a Volvo V40
Volvo V40 (2012-2019 / MK 2) This brief video guide shows how to reset the tyre pressure on your Volvo V40, second series model produced from 2012 onwards. Start the operation by…
How to Remove the Centre Dashboard Panel of the Volvo V40
How to Remove the Centre Dashboard Panel of the Volvo V40
Volvo V40 (2012-2019 / MK 2) To remove the centre dashboard panel of the Volvo V40, pry around the air vents to unscrew the screws underneath. Next, detach the cover located at t…
How to Reset the Tyre Pressure Light on the Volvo V40
How to Reset the Tyre Pressure Light on the Volvo V40
Volvo V40 (2012-2019 / MK 2) To reset the tyre pressure light on your Volvo V40 second series (2012-2019), follow these steps. First, enter the cabin and turn on the instrument p…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos