Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn Off the Tyre Pressure Warning Light on a Volvo V40

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Tire pressure warning light

To turn off the tyre warning light on a Volvo V40, first, switch on the ignition. Access the menu by pressing the appropriate button on the central console; the main menu will appear on the screen. Rotate the dial to select the sub-menu "my car". Confirm and enter "my V40". Confirm again and navigate to the new sub-menu, scrolling down to "tyre monitoring". The display will prompt you to check all four tyres. If you've already done this, press "OK" and the calibration will start automatically. At this point, you can exit using the exit button and return to the main menu.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure on a Volvo V40
How to Reset the Tyre Pressure on a Volvo V40
Volvo V40 (2012-2019 / MK 2) This brief video guide shows how to reset the tyre pressure on your Volvo V40, second series model produced from 2012 onwards. Start the operation by…
How to Reset the Tyre Warning Light on the Volvo V40?
How to Reset the Tyre Warning Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In this tutorial, you will learn how to reset the tyre warning light on the Volvo V40, a very simple and quick operation to perform only after restor…
Resetting the tire pressure warning light on the Volvo V40
Resetting the tire pressure warning light on the Volvo V40
Volvo V40 (2012-2019 / MK 2) The procedure outlined in this guide will show us how to reset the tire pressure warning light on the Volvo V40; before performing the reset, it is n…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos