Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake on a Volvo C70?

Model: Volvo C70 MK 2 - Years 2005-2013
Part: Parking brake

In this tutorial, you will learn how to adjust the handbrake on a Volvo C70, a very simple and quick operation. First, position the vehicle on a flat surface with the first gear engaged, then release the handbrake and lift the centre armrest. Next, carefully pry open the small cover indicated using a flat-head screwdriver, locate the adjustment bolt, and slightly tighten it with a Torx T40 spanner. Once you reach the ideal tension level, check it by pulling the lever to its maximum position and reassemble everything.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the handbrake lever of the Volvo C70
How to adjust the handbrake lever of the Volvo C70
Volvo C70 (2005-2013 / MK 2) Following these brief and simple steps, we will see how to adjust the handbrake lever of the Volvo C70. First, we get into the car and start by openi…
Where are the fuses located in the Volvo C70?
Where are the fuses located in the Volvo C70?
Volvo C70 (2005-2013 / MK 2) All the fuses of the Volvo C70 are contained within the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be …
What is the Fuse Diagram for the Volvo C70?
What is the Fuse Diagram for the Volvo C70?
Volvo C70 (2005-2013 / MK 2) In this video, you will see where the fuse boxes are located in the Volvo C70 and their respective diagrams, useful in case you need to check the fus…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos