Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Volvo C30?

Model: Volvo C30 MK 1 - Years 2006-2013
Part: Service warning light

The operation of resetting the Service light on the Volvo C30 is carried out by holding down the TRIP button located in the central part of the instrument panel: continuing to hold down this button, it will be possible to insert the ignition key into the corresponding slot. Then, you will need to turn it to position two to turn on the instrument panel: now you will need to continue holding down the TRIP button, noticing that the Service light will be flashing. When it turns off, you can release the button and turn off the instrument panel by turning the key.

Posted on 28 February 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on Volvo C30
Resetting the Service Light on Volvo C30
Volvo C30 (2006-2013 / MK 1) Briefly, here are the instructions on how to reset the service light for routine maintenance on the Volvo C30. First, get inside the vehicle and pres…
How do you reset the Service light on the Volvo C30?
How do you reset the Service light on the Volvo C30?
Volvo C30 (2006-2013 / MK 1) To reset the Service light that appears on the instrument panel of the Volvo C30, you need to keep the button located in the central lower part of th…
How do you reset the Service light on the Volvo C30?
How do you reset the Service light on the Volvo C30?
Volvo C30 (2006-2013 / MK 1) The procedure to reset the Service light on the Volvo C30 involves holding down the TRIP button located in the center of the instrument panel: while …

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos