Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Volvo XC90?

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Service warning light

The procedure to reset the Service light on the Volvo XC90 is done by pressing and holding the button located on the left side of the instrument panel while it is turned off. Continuing to hold the button, you can insert the ignition key into the ignition switch and turn it to turn on the instrument panel: once the panel is on, you can wait a few seconds with the button pressed, so that the Service light is reset. At the end of the procedure, you can verify that the light has disappeared from the instrument panel, which can then be turned off.

Posted on 13 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Volvo XC90
How to reset the service light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) After performing the maintenance service, it is necessary to reset the service light for the engine oil change; let's see the reset procedure on the …
How to Reset the Service Light on a Volvo XC90
How to Reset the Service Light on a Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Follow these instructions to reset the service light for routine maintenance on a Volvo XC90. First, get in the vehicle and press and hold the reset …
How to Reset the Service Light on the Volvo XC90
How to Reset the Service Light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Let's go over the steps to reset the service light for the routine oil change maintenance on the Volvo XC90. First, get inside the vehicle and turn o…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos