Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Yamaha Fz 07 - Videoguide

Yamaha Fz 07
How do you adjust the front headlight of the Yamaha FZ-07?
In order to adjust the front headlight of the Yamaha FZ-07, you need to start the motorcycle and turn on the headlight, so that you can check the direction of …read all…
Posted on 1 October 2023 by ScegliAuto
Yamaha Fz 07
How do you replace the headlight bulb of the Yamaha FZ-07?
To replace the headlight bulb of the Yamaha FZ-07, you need to loosen the four screws that secure the motorcycle's headlight so that it can be detached from …read all…
Posted on 18 April 2023 by ScegliAuto
Yamaha Fz 07
How to make the service (oil change) to the Yamaha FZ-07
Let's briefly see the instructions necessary to carry out the routine maintenance service, replacing the engine oil and the oil filter, of the Yamaha FZ-07, …read all…
Posted on 1 June 2022 by ScegliAuto
Yamaha Fz 07
How to replace the battery of the Yamaha FZ-07?
In order to replace the battery of the Yamaha FZ-07 you have to remove the saddle, which is simply stuck by its fixing clips. Once the saddle has been removed, …read all…
Posted on 20 April 2024 by ScegliAuto
Yamaha Fz 07
Removing the front wheel Yamaha FZ-07
Today we will see the instructions on how to disassemble the front wheel of a Yamaha FZ-07. First of all we apply the stand, in order to raise the front wheel, …read all…
Posted on 8 January 2024 by ScegliAuto
Battery (1) Headlight (1) Headlight bulb (1) Engine oil (1) Wheel (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos