|
Do it yourself
| |||
| ||||
Model: Yamaha Fz 07
To adjust the headlight on the Yamaha FZ-07, start the bike and turn on the headlight to check the direction of the beam: to adjust the headlight angle, you will need to tighten or loosen a screw located between the fork and the headlight. This screw should be loosened to raise the beam angle and tightened to direct the beam downwards. After adjusting the headlight, you can remove the screwdriver and turn off the instrument panel.
Updated on 20 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Fz 07
To replace the headlight bulb on a Yamaha FZ-07, loosen the four screws securing the front headlight to detach it from its housing. After removing th…
Fz 07
In this tutorial we can see how to replace the headlight bulb in the Yamaha FZ-07, an extremely simple and quick operation. First of all, make sure t…
Fz 07
In this tutorial we can see how to replace the battery in the Yamaha FZ-07, a very simple and quick operation. First of all, make sure that the key i…
|
How to Remove the Engine from a KTM EXC 300?
To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
