Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the gear oil of a Yamaha XJ6, start by positioning the motorcycle on a stable stand to prevent movement. Under the engine, locate the gear oil drain plug. Using a suitable wrench, carefully unscrew the plug and let the old oil drain completely into a container. Once the oil is completely drained, screw the drain plug back in and make sure it is tightly secured to prevent leaks. Finally, fill the gearbox with the quantity and type of new oil specified in the motorcycle manual, using a funnel to facilitate the operation and prevent spills.

Posted on 5 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Yamaha XJ 600 Diversion?
How to Change the Engine Oil on a Yamaha XJ 600 Diversion?
Xj 600 Diversion As you will see in this tutorial, changing the engine oil on a Yamaha XJ 600 Diversion is an extremely simple and quick operation. First, wait until …
How to Replace the Air Filter on the Yamaha XJ 600 Diversion
How to Replace the Air Filter on the Yamaha XJ 600 Diversion
Xj 600 Diversion In this tutorial, see how to replace the air filter on the Yamaha XJ 600 Diversion, a very simple and quick operation. First, remove the main seat, t…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos