Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 125
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the Yamaha MT-125, a very simple and quick operation. First of all, make sure that the engine is cold enough, then remove the lower cover and place a container underneath the motorcycle. Next, locate the drainage hole bolt, unscrew it using a 20mm socket wrench and let all the oil in the system drain out. Finally, open the filter cap, insert the replacement, reassemble everything and pour the necessary amount of oil through the appropriate hole.

Posted on 15 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Yamaha MT-125
How to Change the Engine Oil in a Yamaha MT-125
Mt 125 In this tutorial, we will see how to change the engine oil in a Yamaha MT-125, a very simple and quick operation. First, wait until the engine is coo…
How to Change the Engine Oil in the Yamaha MT-125?
How to Change the Engine Oil in the Yamaha MT-125?
Mt 125 As shown in this tutorial, changing the engine oil in the Yamaha MT-125 is an extremely simple and quick operation. First, wait for the engine to coo…
How to Reset the Oil Service on the Yamaha MT-125?
How to Reset the Oil Service on the Yamaha MT-125?
Mt 125 Resetting the oil service on the Yamaha MT-125 is an extremely simple and quick operation. First, ensure you have completed all scheduled maintenance…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos