Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The Oil Service light that appears on the instrument panel of the Yamaha Tmax 530 can be reset by turning on the instrument panel with the ignition key inserted into its block: once the instrument panel is turned on, you will need to press the RESET button located on the left side of the panel, at the bottom of the tachometer. By holding down this button, you will notice that the Oil Service light will start flashing: after waiting a few seconds, the light will disappear completely and you can release the button, turning off the panel and removing the key.

Posted on 28 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Warning Light on Yamaha Tmax 530
How to Reset the Oil Warning Light on Yamaha Tmax 530
Tmax 530 If the oil warning light on your Yamaha Tmax 530 illuminates despite a recent fluid change, you need to perform a simple manual reset procedure as de…
How to reset the Service light on the Yamaha Tmax 530?
How to reset the Service light on the Yamaha Tmax 530?
Tmax 530 To reset the Service light on the Yamaha Tmax 530, turn on the ignition by turning the key in the ignition switch: once the dashboard is lit, navigat…
How do you reset the engine light of the Yamaha Tmax 530?
How do you reset the engine light of the Yamaha Tmax 530?
Tmax 530 When the engine light appears on the instrument panel of the Yamaha Tmax 530, it means that a generic problem has occurred in the motorcycle's inject…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos